Replaces the 3 ft patch wire between sensors with a 10 ft wire.

XS-01
Extra FloodStop Sensor Pad
Only for use with FloodStop leak detection equipment.
Floodstop extra sensor pad to protect more than one area at a time or to "daisy chain" to extend your reach. 3' of wire.

WAE-9
Only for use with FloodStop leak detection equipment.
Transformer Extension Wire to extend your A/C wall adapter reach for those outlets that are farther away. 9 feet of extension wire.

CEXT-9
If you would like the FloodStop Controller to be located further away from the FloodStop valve than the kit provides, our new 9 foot long white Controller to Valve Extension Wire(s) will fit the bill (one wire needed per valve).

XS-02 Extra FloodStop Sensor Pad

9 volt DC wall adaptor that powers the FloodStop products when not using batteries.

Wire harness for any FloodStop unit with two valves. Valve wires are 33" long.

Wire harness for any FloodStop unit with one valve.

Sensor Manifold to be used when daisy-chaining the extra water sensors (XS-01) is not easily done. Using the SM01 will allow 5 sensors to branch off in 5 different directions, instead of running one wire to and from all locations.

Wire harness for any FloodStop unit with two valves. Valve wires are 72" long.

Replacement motor for all FloodStop valves.

(Currently Sold Out). Extra Wireless Water Sensor Kit. This unit is used with the FloodStop wireless whole house units, and includes the module, sensor pad and wall adaptor. All of our whole house systems can handle up to 10 wireless sensor modules with numerous sensor pads branching from each module. These units are very easy to pair or sync to the FloodStop system, and takes only 1 minute to add.

FloodStop controller for any FloodStop kit with one valve.

Wifi module connects to any FloodStop controller, and will send SMS text messages and/or emails whenever the FloodStop triggers.  No subscription. Purchase price covers all cost.  Can have 2 phone numbers for text and 5 different email addresses.

This is the FS14C valve....Valve Only.
6volt DC, multistage gearbox with 1/4" compression fittings

This is the FS34NPT valve....Valve Only.
6volt DC, multistage gearbox with 3/4" MIP X FIP pipe fittings

This is the FS38C valve....Valve Only.
6volt DC, multistage gearbox with 3/8" compression fittings

This is the FS3/4C valve....Valve Only.
6volt DC, multistage gearbox with 3/4" Compression fittings

This is the FS1/2NPT valve....Valve Only.
6volt DC, multistage gearbox with 1/2" MIP X FIP pipe fittings

FloodStop controller for any FloodStop kit with two valves.

This is the FS1NPT valve....Valve Only.
6volt DC, multistage gearbox with 1" MIP X FIP pipe fittings

This is the FS125NPT valve....Valve Only.
6volt DC, multistage gearbox with 1.25" MIP X FIP Pipe fittings

This is the FS3/4H90 valve....Valve Only.
6volt DC, multistage gearbox with 3/4" hose fittings

This is the FS3/4H valve....Valve Only.
6volt DC, multistage gearbox with 3/4" hose fittings

FS1/4C (New V4 Controller)
Easily prevent water damage from leaking water filters, ice makers, or any other items that use 1/4" Compression fittings
This unit will detect a leak, sound an alarm, and automatically turn off the water supply to the offending appliance or pipe to prevent further damage.
This unit can be easily installed in about 10 minutes.
Comes with a One Year warranty.
Components: Motorized Ball Valve (1/4 inch Compression Fitting), Control Unit, Water/Leak Sensor (1.25” X 7.5”), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (1).

FS3/4NPT (New V4 Controller)
The FloodStop for water heaters automatically shuts off the water supply to the water heater and sounds an alarm, leaving all other household fixtures and appliances operational.
Easily installed in fifteen minutes.
One Year Manufacturer's Warranty.
Components: Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded), Power Control Unit with Batteries (4 AA) or use AC Power Adapter with or without battery backup. Water/Leak Sensor (1.25” X 7.5”),

FS3/8C
Prevent water damage from flooding Dishwashers, Water Filters, Toilets, or any other items that use 3/8" Compression fittings
This unit will detect a leak, sound an alarm, and automatically turn off the water supply to the offending appliance or pipe to prevent further damage.
This unit can be easily installed in about 10 minutes.
Comes with a One Year warranty.
Components: Motorized Ball Valve (One Valve, 3/8 inch Compression Fitting), V4 Control Unit (with Battery Backup 4 X AA Size), Water/Leak Sensor (1.25” X 7.5”), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (1).

FS1/2NPT

Easily prevent water damage from leaking water heaters, water softeners, or even the water main!
This unit will detect a leak, sound an alarm, and automatically turn off the water supply to the offending appliance or pipe to prevent further damage.
This unit can be easily installed in about 15 minutes.
Comes with a One Year warranty.
Components: Motorized Full-Port Ball Valve (1/2 inch NPT pipe threaded), Control Unit (with Battery Backup 4 X AA Size), Water/Leak Sensor (1.25” X 7.5”), AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source), Output Contact Wires (2).

FS3/4C
The FloodStop “Compression” model for water heaters automatically shuts off the water supply to the water heater and sounds an alarm, leaving all other household fixtures and appliances operational.
Easily installed in fifteen minutes.
1-Year Manufacturer's Warranty.
Components: Motorized “Full-Port” Ball Valve (3/4 inch with “Compression Fitting” for copper pipe applications)Control Unit with Battery Backup (4 AA), Water/Leak Sensor (1.25” X 7.5”) and AC Power Adaptor

FS3/8CD (V4 controller)
Prevent water damage from leaking sinks, basins, or any other items that use 3/8" Compression fittings
This unit will detect a leak, sound an alarm, and automatically turn off the water supply to the offending appliance or pipe to prevent further damage.
This unit can be easily installed in about 10 minutes.
Comes with a One Year warranty.
Components: Motorized Ball Valves , (Two Valves, 3/8 inch Compression Fitting)Control Unit (with Battery Backup 4 X C Size), Water/Leak Sensor (1.25” X 7.5”), AC Power Adaptor (or use 4 X C Batteries as Primary Power Source), Output Contact Wires (2).